Product Description
St-37 S235jr S355jr S355 Hot Rolled 15mm Carbon Steel Plate
Standard: AISI ASTM SUS JIS EN DIN,
Steel Plate (Hot rolled ) S235JR ,A235J0 , S235J2 , S275Jr , S275J0 , S275J2 ,S355JR ,S355J2 , S355J0 ; S355K2 , S355N , S355NL
EN 1.0038 , 1.0114 , 1.0117 , 1.0044 , 1.0143 , 1.0145 , 1.0045 , 1.0553 , 1.0577 , 1.0596 , 1.0590 ;
GB: Q235B ,Q195 ,Q215 ,Q345B
DIN: ST12 ST13 ,ST14 ST,15 ,St-38 , DC 01 ,DC02 ,DC03 ,DC04
JIS: SS400 ,SPCC ,SPCD ,SPCE
| Grade : |
S355JR |
| Standard: |
EN 10025 - 2 : 2004
Technical delivery conditions for non-alloy structural steels |
| Classification: |
Non-alloy structural steels |
S355 structural steel plate is a high-strength low-alloy European standard structural
steel covering four of the six "Parts" within the EN 10025 - 2004 standard.
With minimum yield of 50,000 KSI, it meets requirements in chemistry and physical properties similar to ASTM A572 / 709. Careful attention should always be placed on the specific variation of S355 required if considering substitute material.
1. Chemical composition % of the ladle analysis of grade S355JR
| Nominal thickness =< 30(mm) CEV max = 0.45 |
| C |
Si |
Mn |
P |
S |
N |
Cu |
CEV |
| max 0.24 |
max 0.55 |
max 1.6 |
max 0.04 |
max 0.04 |
max 0.012 |
max 0.55 |
max 0.47 |
2. Mechanical properties of grade S355JR
| Nominal thickness (mm) |
to 16 |
16 - 40 |
40 - 63 |
63 - 80 |
80 - 100 |
100 - 125 |
| ReH - Minimum yield strength (MPa) |
355 |
345 |
335 |
325 |
315 |
295 |
3.
| Nominal thickness (mm) |
3 - 100 |
100 - 125 |
| Rm -Tensile strength (MPa) |
470-630 |
450-600 |
| Nominal thickness (mm) |
3 - 40 |
40 - 63 |
63 - 100 |
100 - 125 |
| A - Minimum elongation Lo = 5,65 √ So (%) |
22 |
21 |
20 |
18 |
| Temperature |
-20 |
0 |
20 |
| Notch impact test. Min. absorbed energy |
27 |
27 |
27 |
4. Application : S355 is used in almost every facet of structural fabrication. Typical applications include:
Δ Structural steelworks: bridge components, components for offshore structures
Δ Power plants
Δ Mining and earth-moving equipment
Δ Load-handling equipment
Δ Wind tower components
5. Thickness: 1.0-100.0mm
6. Width: 1000mm, 1219mm, 1500mm, 1800. And length: Could be cut into any size as per customer's request. Usually our common sizes: 1219mm*2438mm (4*8ft), 1219mm*3048mm (4*10ft) and 1000mm*2000mm.
7. Packing: Iron Belt fastened , or customize package.
Product show
Company
Tianjin Boerking steel Group
Contact:
Contact: Tina Zhang
Boer King Steel Group
Tianjin Boer King Steel IMP&EXP Co.,Ltd
Add: No.602,Shuanggang Development Zone,Tianjin,300350 China.
Tel: 0086-22-28577880
Fax: 0086-22-28577888
Cel: 0086-15122870239
Web: http://boerkingsteel.en.made-in-china.com
Pls. do not hesitate to contact me if you have any questions.
You are warm welcomed to visit our factory!!!
Audited Supplier 
){kind=link}
){kind=link}